Batch Pressure Mixer, 5 Quart, Pneumatic, 1378, Semco, TESTED

Description

Batch Pressure Mixer, 5 Quart, Pneumatic, 1378, Semco, TESTED
This is a used Semco 1378 pneumatic mixers. Mixer use two double-acting pneumatic cylinders to evenly mix liquid or viscous materials which are then injected into a polyethylene cartridge for use with a SEMCO sealant gun. The mixer was tested and does work aside from the setpoint counter which does not register. In order to be fully operational, this unit must have post and dasher assemblies which are both missing.
To see the operation please see the test video. The machine has a pneumatic cylinder in the upper portion which lowers that piston and a cylinder in the lower portion that raises the platen. The lower platen is raised up with a lever and then remains in a lifted position. After the lower platen is adjusted, the dasher control lever is activated which reciprocates the dasher rod. The reciprocating rod always stays 1/2 to 1" above the lower platen regardless fo the lower platen position. The machine is entirely pneumatically controlled. There is a pneumatic setpoint control that is supposed to count down the strokes but it does not work. Unit mechanically works well but the paint is in poor condition.
Includes only what is pictured
5 quart capacity
Each cylinder has a control lever:
Upper cylinder (Dasher assembly):
Up
Off
Mixing
Lower cylinder:
Up
Off
Down
Pneumatic requirements:
90 PSI
15 CFM
Click
HERE
to see test video.
Specifications:
MFG:       Semco
Model:     1378
Serial:     5881
Volts:
Amps:
Phase:
Year:
Drive:
Controls:
Manuals:
Air:         90 PSI, 15 CFM
Weight:   1370 Lbs
Condition: Used
Length:   24
Width:     38
Height:    80
All dims inches unless otherwise noted
Inventory #: 7827
Location: PRDB14C
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.