Crane Deming 3122 Centrifugal Pump with 10 HP Baldor 230/460V motor

Description

Crane Deming 3122 Centrifugal Pump with 10 HP Baldor 230/460V motor
Untested.  Motor looks newer and pump looks recently serviced, but condition is unknown.
PUMP>>>>>>>
Design Features Model 3122:
1. Liquid end - Top centerline back pull-put design allows disassembly without disturbing the suction and/or discharge piping.
2. Impeller - Enclosed type, statically and hydraulically balanced for optimum performance. Straight bore design for interchangeability on both frame and close-coupled designs.
3. Impeller/Adapter wearing rings - Are optional on enclosed impellers.
4. Adapter assembly - Combination motor/frame support and seal housing.
5. Shaft Sleeve - Hooked style for maximum drive and 316 stainless steel for serviceability.
6. Motor - Close-coupled JM Frame.
MOTOR>>>
JMM3711T
10HP, 3490RPM, 3PH, 60HZ, 215JM, 3729M, TEFC, F
Ship Weight
124.000 LB
UPC
781568113547
Product has been discontinued
Catalog Number
JMM3711T
Enclosure
TEFC
Frame
215JM
Frame Material
Steel
Frequency
60.00 Hz
Output @ Frequency
10.000 HP @ 60 HZ
Phase
3
Synchronous Speed @ Frequency
3600 RPM @ 60 HZ
Voltage @ Frequency
208.0 V @ 60 HZ
230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Class and Group
None
XP Division
Not Applicable
Agency Approvals
UR
CSA
Ambient Temperature
40 °C
Auxillary Box
No Auxillary Box
Auxillary Box Lead Termination
None
None
Base Indicator
Rigid
Bearing Grease Type
Polyrex EM (-20F +300F)
Blower
None
Current @ Voltage
12.000 A @ 460.0 V
24.000 A @ 230.0 V
25.700 A @ 208.0 V
Design Code
B
Drip Cover
No Drip Cover
Duty Rating
CONT
Efficiency @ 100% Load
89.5 %
Electrically Isolated Bearing
Not Electrically Isolated
Feedback Device
NO FEEDBACK
High Voltage Full Load Amps
12.0 a
Front Face Code
Standard
Front Shaft Indicator
None
Heater Indicator
No Heater
Insulation Class
F
Inverter Code
Inverter Ready
KVA Code
H
Lifting Lugs
Standard Lifting Lugs
Locked Bearing Indicator
Locked Bearing
Motor Lead Exit
Ko Box
Motor Lead Termination
Flying Leads
Motor Lead Quantity/Wire Size
9 @ 14 AWG
Motor Type
3729M
Mounting Arrangement
F1
Number of Poles
2
Overall Length
19.76 IN
Power Factor
87
Product Family
General Purpose
Pulley End Bearing Type
Ball
Pulley Face Code
C-Face
Pulley Shaft Indicator
Tapped & Key
Rodent Screen
None
Service Factor
1.15
Shaft Diameter
0.875 IN
Shaft Extension Location
Pulley End
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Shaft Slinger Indicator
Shaft Slinger
Speed
3490 rpm
Speed Code
Single Speed
Motor Standards
NEMA
Starting Method
Direct on line
Thermal Device - Bearing
None
Thermal Device - Winding
None
Vibration Sensor Indicator
No Vibration Sensor
Winding Thermal 1
None
Winding Thermal 2
None