Lightnin 75C10 Mixer

Description

Lightnin 75C10 Mixer
Model: 75C10, S/N: 1000002434142-4
Ratio: 70.02:1, Final Output: 25 RPM
=============================
Motor Data:
Motor HP: 10, RPM: 1800, Duty: Inverter
Volts: 230/460, Phase: 3, Hz: 60
Enclosure: TEFC, Frame: 215T
=========================================
Material of In-Tank Mixer Parts is 316 SS
=========================================
Impeller Data:
Impeller Qty: 4, Type: A510E/A510E/A510E/A510E
Impeller Diameter: (3) 74.00" & (1) 70.00"
Qty of Blades: 3/3/3/3
RPM: 25, Impeller Hubs Not Adjustable or Removable
From Position Shown. Blades To Be Polished and Field
Welded By Others.
=================================================
Total Mixer Weight: 3436 lbs./Each (1559 kg/Each)
=================================================
Mixer Mounting Design Data:
Vertical Downward Load: 6650 Lbs. (29579 N)
Torque: 47505 In-Lbs (5368 N-m)
Bending Moment: 155000 In-Lbs. (17515 N-m)
Design Loads Are Greater Than Actual Loads
By A Suitable Factor, Consistent With
Construction Codes and Lightnin Experience.
========================================
Unit Is Furnished With A Low Pressure Stuffing Box
Packing Material: Combination 50
==========================
Mixer Mounting Flange Data:
150 lb. ANSI Series Drilling
Size: 14", O.D.: 21.00", Bolt Circle: 18.75"
No. of Holes: 12, Bolt Dia: 1.00"
As Common Practice, Flange Bolt Holes Are
Shown Straddling Mixer Centerline.
==================================
Unit Is Furnished With A Steel-Flex High Speed Coupling
===========================================
There are (2) additional units available, but without the impellers.
=================================================