MOTORIZED 3 AXIS PROJECT MACHINE INSPECTION TABLE 8 X 32 DRO MACHINING GRINDING

Description

Excellent project table for machining or a grinding!
3 Axis slotted table, motorized on the X and Y axis.  Unit came off a large OGP comparator which has been parted out.  Table is in very good shape!  Manual control on the Z axis.  Includes servo control and original DRO.  This comes in the raw form you see here with excellent mount points for a custom build.  There are some extra components in the control panel you probably do not need, but which will be included.  I will do my best to point out what is what upon shipping to help eliminate confusion.  I do not have the CABLE adaptor for the connection from the DRO to the Y linear scale, so you will have to find one of those or customize the connection.
Overall, unit is smooth, runs off knobs shown on skid near control system.  There are switches included that you will not need, and again this is being sold as a formidable project piece and will require adaptations.  There are limit switches on the the Y axis which can be set to your desired travel within the limitations of the machine, meaning there may be more range to be had there.
Below are specifications:
Table size: 32" x 8"
Y axis (up-down) travel: Travel exceeds the base or bottom of the framing by approximately 2".  Measured travel from base-up was 8.8" making a total travel if unit was raised close to 10.8" according to the limit switch position
X axis (side to side) travel: 11.5"
Z axis ( front to back): 3.25"
Height raised from floor minimum 32.5", maximum 41.125"
115vac, single phase
footprint of table: 34"W x 19"D x 32.5"H (lowered)
Approximate shipping weight 1300lbs
When requesting a quote, please provide zip, commercial or residential delivery, dock, fork lift or terminal pickup.
Thank you!!!