Shaking assbly for Reaction vessel, 4 3/8in, Heated Shaker, 1600W, Superpressure

Description

Shaking assbly for Reaction vessel, 4 3/8in, Heated Shaker, 1600W, Superpressure
This is a shaking and heating assembly made by the Superpressure Division of American Instrument Company (now Newport Scientific), model 40-14135.
We powered up the motor and the shaker operated quietly and very well.
This is in good used condition with some minor cosmetic paint blemishes.
Tilts through an angle of 30 degrees at 36 cycles per minute
Steel and cast iron construction
115 volt, the heater and the motor have separate plugs
Gear motor:
1/3 hp
36 rpm output
Vessel receptical:
OD: 4 3/8 inches
ID: 3 5/16 inches
Depth: 10 inches
Thermocouple slot
Heater:
1600 W
3 way switch for low, medium, high heat
Gauge: 10,000 psi
All tubing and valves rated at 30,000 psi
Max working pressure (lb/in^2):
100 deg F: 5050
500 deg F: 4600
650 deg F: 4550
800 deg F: 4500
Specifications:
MFG:       American Instrument (Newport Scientific)
Model:     40-14135
Serial:     GG971-7
Volts:      115
Amps:
Phase:    1
Year:
Drive:
Controls:
Manuals:
Air:
Weight:   325 Lbs
Condition: Used
Length:   28
Width:     25
Height:    39
All dims inches unless otherwise noted
Inventory #: 5287
Location: PRD5B
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.